SCM 435 steel is a Chromium-Molybdenum through-hardening steel of medium hardenability. It is a general purpose high-tensile steel with medium strength level and good impact properties.
As Rolled
SCM 435 steel bar is mainly used to produce high strength stud bolt, Threaded Rods , wind power bolt, pre-stressed anchor bolts, post stressed anchor bolt, Steel Tie Rod , tie bar, tension rod, Tension Bar etc. Shaft, axle shaft, crankshaft, shaft for sleeve, linear shaft, pump shaft, rotor shaft, sensor shaft, spline shaft, drive shaft, mandrel shaft, transmission shaft, screw rod etc. CNC machines, precision CNC machines etc. Ejector pins and Ejector rods.
| Internal Standard | BS | DIN | IS | EN | AISI/SAE |
| SCM435 | 708A30 708M32 |
34CrMo4 | - | 34CrMo4 (1.7220) | 4135 |
| C | MN | SI | S | P | Cr | Ni | Mo | V | B |
| 0.33-0.38 | 0.60-0.90 | 0.15-0.35 | .035 Max | .035 Max | 0.90-1.20 | - | 0.15-0.30 | - | - |
260-290 BHN
Spread over 2 verticals, the group produces economical and class-leading mild, alloy and carbon steel, hex, round, square, wire rods, ingots and billets with the most modern integrated steel manufacturing facility.
+91-97814-06106/107/108
info@tksteels.com
© 2022 TK Steels. All Rights Reserved.
Market Trends
