+91-97814-06106/107/108

Hot Forging Die Blocks (DB6)

Grade Introduction:

DB6 is highly recommendable for Close Die Forgings due to its characteristics of high wear-resistance, extra toughness , high hardness which is achieved with Cr-Ni-Mo-V high graded alloys. The equivalent grade DB6 / L6 / SKT4 normally used as a pre hardened condition.

Supplied Condition:

Hot Rolled

Grade Applications:

It is used for making dies for forging hammers, die moulds, shoe blocks, die holders, piston rods.

Equivalent Grades:

Internal Standard BS DIN IS EN AISI/SAE
DB6 - 2714 - - -

Chemical Composition:

C MN SI S P Cr Ni Mo V B
0.50-0.60 0.65-0.80 0.15-0.35 .035 Max .035 Max 1.00-1.20 1.55-1.70 0.40-0.50 0.07-0.15 -

Hardness:

N/A

© 2022 TK Steels. All Rights Reserved.